The design area of this stencil measures approximately 31/8" x 3-7/8" plus border, with a Fish and Boat design inspired by MC Escher.
NOTE: stencil is not an open design stencil for tracing, but a mesh. It's a silkscreen.
For use on Polymer clay, Fabric, paper and can be used on smooth wood, glass, metal etc. Very low relief and not a deep impression like a rubber stamp mat, but will leave a slight texture when used without paint.
The stencil can be used on Polymer Clay, Fabric or paper. If using paints, please use Jacquard, Jones Tones or Golden Acrylic Paints which have fine particles.
After using these paints, you should gently wash the stencil in warm water as soon as possible as dry paints are hard if not impossible to remove. Let stencil dry before using again. Following this direction will extend the life of the stencil over many uses.
Included is a simple printout of instructions. ArmorAll (Automotive vinyl protector) is recommended as a release agent for use on polymer clay, or to condition the screen to make it last longer for such use, but is NOT necessary. Water can be used instead.